Concrete · Flat interlocking

Thin-edged interlocking tiles that look like slate from the ground.

Illustration of Concrete slate-effect tiles

About this roof covering

An interlocking concrete tile with a thin leading edge and a smooth or riven face, so a finished roof reads like slate. You get the slate look at a lower cost, laid much faster and on lower pitches.

Typical minimum pitch
17.5° and steeper
Typical lifespan
50–60 years
Weight
Medium
Relative cost
££ Mid-range
Coverage
About 10 tiles per m²
Style
Modern · Flat interlocking

Colours

  • Grey
  • Blue-grey
  • Black

Good for

  • Slate look on a budget
  • Low-pitched roofs
  • Large roofs

Pros

  • Convincing slate look
  • Quick to lay
  • Lower cost than natural slate

Things to consider

  • Heavier than real slate
  • Not usually accepted in conservation areas

Where you'll see it: Modern estates and re-roofs where slate was too costly.

Figures are typical guides and vary by manufacturer and roof. We’ll confirm what suits your roof at a free inspection. The picture is an illustration.

Compare

See all 40 in the roof tile guide

Book a free inspection, or send a few photos for a free online estimate. No deposit, and you only pay when the job is done.

  • No depositPay on completion, once you’re happy
  • Free inspectionWith a fixed, written quote
  • 24/7 call-outsFor leaks and storm damage
Call 24/70330 633 5952 Free quote